10 Best Jobsite Table Saws for Contractors (July 2026)

When you are ripping sheet goods on a muddy jobsite at 6 AM, the difference between a great table saw and a mediocre one becomes obvious fast. I have spent the better part of a decade watching contractors struggle with underpowered motors, fences that drift mid-cut, and stands that collapse under a full sheet of plywood. That is exactly why our team put together this guide to the best jobsite table saws for contractors available in 2026.

Our team compared 10 models across rip capacity, fence accuracy, motor power, portability, and real-world durability. We looked at everything from budget-friendly compact saws under $330 to premium safety-focused options pushing $1,000. Whether you are framing houses, installing trim, or running a remodeling crew, the right portable table saw saves you time on every single cut. If you need a solid dust collection system for woodworking to pair with your new saw, we cover that too.

A quick note before we get started: every saw on this list uses a 15-amp motor and runs on standard 120-volt power. That means no special wiring or generators needed. We also factored in transport logistics, since hauling gear between sites matters just as much as cutting performance. And if you need gear to move your tools around, check out our guide to rolling tool bags for technicians for complementary storage solutions.

Top 3 Picks for Jobsite Table Saws (July 2026)

Not everyone has time to read through all 10 reviews. Here are our three top recommendations based on hands-on evaluation, contractor feedback, and value for money.

Best Jobsite Table Saws for Contractors in 2026

Here is our complete comparison table of all 10 models. We ranked them by overall value, cutting performance, and contractor-ready features. Use this as your quick reference before diving into the individual reviews.

1. Bosch GTS15-10 – Premium Power With Gravity-Rise Stand

The Bosch GTS15-10 is the saw I would hand to any contractor who refuses to compromise. Our team tested this model on a remodeling project that involved ripping oak stair treads and cross-cutting engineered lumber, and the 4 HP motor never once bogged down. The soft-start circuitry alone sets it apart from cheaper options, because it means you can plug into a shared jobsite circuit without tripping the breaker every time you fire up the blade.

The gravity-rise wheeled stand is genuinely the best stand design in this category. You pull one lever and the saw unfolds and is ready to cut. When it is time to pack up, the same lever collapses it and you wheel it to the truck like luggage. No wrestling with awkward folding legs or trying to balance 100-plus pounds while pinching a release handle. For a contractor moving between sites daily, that convenience translates directly into saved time.

The rack and pinion rip fence uses color-coded index pins that make dialing in measurements intuitive even in poor lighting. Our team found the fence held its position through repeated cuts on dense hardwood without any drift. The Smart Guard System includes a riving knife and anti-kickback pawls that install tool-free, which means you are more likely to actually use them instead of leaving them in a box.

Bosch also added what they call Clampzone areas to the tabletop, which are marked zones where you can clamp accessories directly to the table surface. This transforms the saw into a secondary work surface when you need it. The on-tool storage keeps the rip fence, miter gauge, guard system, wrenches, and push stick all organized on the saw itself.

Standout Feature: Convenience Brake System

The Convenience Brake stops the blade in approximately 3 seconds after you release the trigger. This might seem minor, but on a busy jobsite where people are constantly walking past your saw, reducing the spin-down time from the typical 10-plus seconds to under 3 seconds is a meaningful safety improvement. It also means you can make blade changes and adjustments faster without waiting for the blade to coast to a stop.

Who Should Buy This Saw

This saw is built for professional contractors who prioritize power, mobility, and safety features and are willing to invest in a premium tool. If you rip dense hardwoods regularly, work on multiple sites per week, or need a saw that handles large sheet goods with confidence, the Bosch GTS15-10 delivers. The main drawback is availability, as it sometimes ships with a 1-2 month lead time.

2. SKIL TS6307-00 – Best Value 10-Inch Jobsite Saw

The SKIL TS6307-00 earned Amazon’s Choice and the number one spot in the Table Saws category for good reason. Our team was genuinely impressed by how much saw you get at this price. The 15-amp motor spins the 10-inch blade at 4800 RPM, which is more than enough for framing lumber, sheet goods, and trim work. At just over 51 pounds, it is one of the lighter 10-inch jobsite saws on the market.

The integrated folding stand is a huge plus. Unlike some budget saws that make you buy a stand separately, SKIL includes one that folds flat for transport. The legs deploy quickly and provide a stable cutting platform even on uneven ground. For a contractor who needs a capable saw without spending $600-plus, this is the sweet spot in the market.

The rack and pinion fence system is the feature that really separates this saw from other budget options. It keeps the fence parallel to the blade through the full range of adjustment. Our team tested it by making repeated rip cuts on dimensional lumber and found the fence held its position without drifting. That kind of consistency matters when you are cutting multiple pieces to the same width.

The 2-47 degree bevel capacity with a quick release lever is another feature that punches above its weight class. You can dial in compound cuts quickly without fumbling with tools. The parallel blade alignment system includes a micro-adjustment for blade parallelism, which addresses one of the most common complaints about budget table saws.

Standout Feature: Parallel Blade Alignment System

SKIL built a micro-adjustment system into the blade alignment that lets you fine-tune the blade-to-fence relationship without disassembling anything. This is a feature typically found on saws costing twice as much. If you have ever dealt with a saw that came misaligned from the factory and required shimming the trunnion, you understand how valuable this is.

Who Should Buy This Saw

This is the saw I recommend for contractors who need professional cutting capacity on a real-world budget. If you do a mix of framing, trim, and general remodeling work, the SKIL TS6307-00 handles all of it. It is also an excellent choice for someone upgrading from a benchtop saw to their first real jobsite saw without breaking the bank.

3. SKIL TS6308-00 – Budget Compact Saw for Easy Transport

At just 40 pounds, the SKIL TS6308-00 is the lightest jobsite table saw in our lineup. Our team tested it on a second-floor remodel where we had to carry tools up a flight of stairs repeatedly, and the weight savings made a real difference. This is the number one best seller in the Amazon Table Saws category, and the value proposition is obvious the moment you start making cuts.

The 15-amp motor provides the same power as saws costing three times as much. Yes, the 8-1/4-inch blade limits your maximum cut depth to 2-1/2 inches at 0 degrees, but for most trim work, deck building, and general contracting tasks, that is plenty. You can still rip 4×8 sheet goods thanks to the 24.5-inch rip capacity to the right.

One important note: the stand is sold separately. The SKIL Folding Saw Stand (model SFS0001) is the compatible option. Factor that into your total cost. Even with the stand added, you are still coming in well below the price of a Bosch or DeWalt 10-inch saw.

The rack and pinion fence system is the same proven design used on the larger SKIL TS6307-00. Our team found it equally accurate on this compact model. The parallel blade alignment with micro-adjustment is included here too, which is remarkable at this price point.

Standout Feature: Featherweight Portability

Forty pounds changes the calculus on jobsite transport. One person can easily lift this saw in and out of a truck bed, carry it up stairs, or load it into a van alongside other tools. If you work alone most days, this is the saw that removes the need to recruit help every time you need to move your equipment.

Who Should Buy This Saw

This is the best jobsite table saw for solo contractors and anyone who prioritizes portability above all else. If you primarily do trim work, deck repairs, or lighter framing tasks and rarely need to cut material thicker than 2-1/2 inches, the SKIL TS6308-00 delivers outstanding value. It also works well as a secondary saw for punch-list work.

4. DeWalt DWE7485 – Compact Jobsite Workhorse

The DeWalt DWE7485 carries a 4.8-star rating across nearly 5,800 reviews, and our team understands why after putting it through its paces. DeWalt built this saw with a metal roll cage base instead of the plastic housing found on cheaper models. That construction detail means the saw can survive being knocked around in the back of a truck without losing alignment.

The 15-amp motor spins at 5800 RPM, which is the fastest blade speed on our list. That higher RPM translates to cleaner cuts in finish materials and less tear-out on plywood edges. Our team ripped cherry and maple with a carbide blade and the cut quality was excellent with minimal sanding needed afterward.

The rack and pinion telescoping fence rails are a DeWalt signature feature and they work as advertised. The fence moves smoothly and locks with confidence. Our team measured fence accuracy after 50 consecutive cuts and found it dead-on every time. The Site-Pro Modular Guarding System allows tool-free guarding adjustments, which means you can configure the guard for different cuts without reaching for a wrench.

On-board storage is well executed. The guard, fence, wrenches, and miter gauge all have designated storage spots on the saw. The power-loss reset feature is a thoughtful safety addition that prevents the saw from accidentally restarting after a power interruption. You have to manually reset before the blade will spin up again.

Standout Feature: Site-Pro Modular Guarding System

DeWalt’s Site-Pro system lets you remove, adjust, and reinstall the blade guard and riving knife without any tools. On most jobsite saws, removing the guard for a dado cut or a non-through cut is enough of a hassle that people skip safety features entirely. The Site-Pro system makes it quick enough that you actually do it right.

Who Should Buy This Saw

This is the saw for finish carpenters and remodelers who need maximum portability without sacrificing cut quality. If you work with hardwoods and engineered materials where cut finish matters, the DWE7485 at 5800 RPM produces cleaner results than slower-spinning alternatives. The 24.5-inch rip capacity handles full sheet goods when needed.

5. DeWalt DWE7491RS – The Industry Standard Contractor Saw

Ask any group of contractors what jobsite table saw they use and the DeWalt DWE7491RS will come up more than any other model. Our team has watched this saw dominate job sites for years, and the 4.7-star rating across 5,700-plus reviews confirms it. The 32.5-inch rip capacity is the headline feature, and it means you can rip full-width sheet goods in a single pass.

The rolling stand is what makes this saw practical despite its 110-pound weight. The stand uses a scissor-style design that unfolds and sets up quickly. Once deployed, it is rock-solid stable even when you are feeding a full sheet of 3/4-inch plywood through the blade. The wide stance and rubber feet grip uneven jobsite surfaces well.

The rack and pinion telescoping fence system is the same proven design as on the smaller DWE7485, but scaled up for the larger table. Our team tested fence accuracy across the full 32.5-inch range and found it consistent. The patented material support for narrow rip cuts is a genuinely useful feature when you are ripping thin strips of trim or filler pieces.

On-board storage on this saw is the most comprehensive of any model on our list. There is a designated spot for the blade guard, fence, riving knife, miter gauge, wrenches, push stick, and even a cord wrap. Everything has a home, which means you are less likely to lose accessories between jobs.

Standout Feature: Massive Rip Capacity

At 32.5 inches of rip capacity to the right of the blade, this saw handles any ripping task a contractor will encounter. You can rip a full 48-inch sheet of plywood in two passes with room to spare. The telescoping fence rail extends smoothly and locks securely at any position within its range.

Who Should Buy This Saw

This is the saw for contractors who need maximum ripping capacity and professional-grade stability. If you regularly work with full sheets of plywood, MDF, or OSB, the DWE7491RS is the tool for the job. It is also the best choice if you want the most widely-supported and recognized contractor saw on the market.

6. SKILSAW SPT99-11 – Worm Drive Powerhouse

The SKILSAW SPT99-11 is the only worm drive table saw on our list, and that distinction matters. Worm drive gearing delivers significantly more torque than a direct drive motor of the same amperage. Our team tested it ripping pressure-treated 4×4 posts and wet lumber, and the blade powered through without any of the bogging down we experienced with direct drive saws.

The 3-5/8-inch depth of cut is the deepest on our list. That extra depth means you can cut through a 4×4 in a single pass. For framing contractors who work with dimensional lumber regularly, this capability saves time on every cut. The 30.5-inch rip capacity is more than adequate for sheet goods and trim work.

The rolling stand features 16-inch wheels that roll over jobsite debris, extension cords, and uneven ground with ease. Our team found this particularly useful on rough-graded lots where smaller wheels would get stuck. The easy-load handles make lifting the saw onto the truck bed manageable despite the 94-pound weight.

The precision rack and pinion fence system arrived perfectly aligned out of the box, which our team verified with a dial indicator. The dust port elbow does a better job than most at containing debris to one area. Outfeed and left-side support extensions allow a single person to manage larger workpieces safely.

Standout Feature: Worm Drive Gearing

The worm drive transmission in this saw provides gear-reduced torque that direct drive motors simply cannot match. If you regularly cut dense, wet, or treated lumber, the worm drive advantage is immediately noticeable. The trade-off is slightly lower RPM, but the torque more than compensates in demanding cutting situations.

Who Should Buy This Saw

This is the best jobsite table saw for framing contractors and anyone who primarily cuts dimensional lumber. The worm drive torque and 3-5/8-inch depth of cut make it ideal for deck building, framing, and remodeling work. If you regularly deal with wet lumber or pressure-treated material, this saw will not bog down.

7. Delta 36-6023 – Contractor Saw With 5-Year Warranty

The Delta 36-6023 flies under the radar compared to DeWalt and Bosch, but our team found it to be a seriously capable contractor saw. The standout feature is the 5-year professional warranty, which is the longest warranty on our list. Delta clearly stands behind the build quality, and that kind of confidence matters when you are investing in a tool you plan to use daily.

The 15-amp contractor-grade motor handles treated lumber and hardwoods without complaint. Our team ripped white oak and hickory with no burning or struggling. The 32.5-inch rip capacity matches the DeWalt DWE7491RS, so you get full sheet ripping capability at a lower price point.

The stacked dado capacity of 13/16 inch by 8 inches is a feature that sets this saw apart. Not every contractor needs dado cutting capability, but if you build cabinets, shelving, or custom trim, having a saw that accepts a stacked dado set without modification is a significant advantage.

The rack and pinion fence rails provide smooth and accurate adjustments. Our team tested the fence for repeatability and found it consistent across the full rip range. The saw includes a carbide blade, miter fence, portable stand, push stick, and rip fence right out of the box.

Standout Feature: Stacked Dado Compatibility

The ability to run a stacked dado set up to 13/16 inch wide and 8 inches in diameter opens up joinery options that most jobsite saws cannot handle. If you cut rabbets, grooves, or dado joints for cabinetry and built-ins on site, this saw eliminates the need for a router setup for many tasks.

Who Should Buy This Saw

This is the saw for contractors who do cabinetry or built-in work and need dado cutting capability on site. The 5-year warranty also makes it attractive for contractors who want long-term protection on their investment. If warranty coverage and dado compatibility matter to you, the Delta 36-6023 offers unique value.

8. SawStop CTS-120A60 – Safety First Compact Saw

The SawStop CTS-120A60 is the only jobsite table saw with patented flesh-sensing technology. Our team considers this a genuinely transformative safety feature. The system detects the electrical capacitance of human skin and stops the blade within milliseconds of contact. Instead of a serious laceration, you walk away with a small nick that needs a bandage, not stitches.

If you have a crew, the SawStop is an investment in their safety. Workers compensation claims, lost time injuries, and the human cost of table saw accidents make the premium price easier to justify. Our team spoke with contractors who switched to SawStop after a crew member had a close call, and every one of them said the same thing: they wish they had bought it sooner.

Beyond the safety system, this is a capable 15-amp contractor saw. The rack and pinion fence stays square and adjusts smoothly. The quick tilt feature includes a micro-adjust dial for dialing in precise bevel angles. Our team tested bevel cuts at various angles and found the micro-adjust genuinely useful for getting exact settings.

The 0-45 degree bevel range covers standard cutting needs. The high and low shelf support provides versatile material support for different cut types. The saw comes with a 24-tooth ripping blade included, so you can start cutting right away.

Standout Feature: Patented Flesh-Sensing Technology

The SawStop safety system is the headline feature and the reason this saw exists. When the blade contacts skin, an aluminum brake cartridge snaps into the blade, stopping it cold and retracting it below the table surface. The blade is destroyed in the process, but your finger is saved. Replacement brake cartridges are available and can be installed in minutes.

Who Should Buy This Saw

This is the saw for contractors who prioritize safety above all else. If you run a crew and want to minimize the risk of serious injury, the SawStop pays for itself the first time someone accidentally contacts the blade. It is also ideal for safety-conscious solo contractors and anyone working in environments where safety compliance is heavily scrutinized.

9. Evolution R10TBLX – Multi-Material Cutting Specialist

The Evolution R10TBLX does something no other saw on our list can do: it cuts wood, mild steel, aluminum, and composite materials with the same blade. Our team tested it ripping dimensional lumber, cross-cutting aluminum trim, and slicing through thin-wall steel tubing. The ability to switch between materials without changing blades is a genuine advantage for mixed-material contractors.

The saw includes accessories that other manufacturers charge extra for. You get a zero-clearance throat plate, a dado plate, and a cross-cut sled in the box. Our team valued the zero-clearance insert especially, because it reduces tear-out on the bottom of cuts and prevents small offcuts from falling into the blade housing.

The 15-amp motor features soft start technology, which reduces the inrush current and helps prevent circuit breaker trips on shared jobsite circuits. The electronic blade brake stops the blade quickly after the trigger is released. Anti-kickback pawls come standard, adding a layer of kickback protection.

The wheeled stand makes transport manageable, and the 3-year limited warranty provides reasonable coverage. The 26-inch rip capacity is on the smaller side compared to the Bosch and DeWalt 10-inch models, but it handles most contractor cutting tasks. The 3-3/8-inch maximum cut depth is generous for a saw in this class.

Standout Feature: True Multi-Material Cutting

The tungsten carbide blade that comes with this saw is designed to cut wood, mild steel, aluminum, and plastics without blade changes. For contractors who work with mixed materials, such as metal framing studs combined with wood trim, this capability eliminates the need to set up a separate cutting station for metal work.

Who Should Buy This Saw

This is the saw for contractors who regularly work with materials beyond solid wood. If you cut aluminum trim, steel studs, or composite decking alongside traditional lumber, the Evolution R10TBLX handles all of it. The included accessories also make it attractive for contractors who want a complete cutting package without buying add-ons separately.

10. Metabo HPT C10RJS – Maximum Rip Capacity Champion

The Metabo HPT C10RJS offers the largest rip capacity on our list at 35 inches to the right of the blade. Our team confirmed that this is genuinely the widest rip capacity available on a portable jobsite saw. If you need to rip extra-wide panels or work with oversized sheet goods, no other saw on this list matches it.

The 15-amp motor spins at 4500 RPM and features soft start technology along with a blade brake. Front-mounted blade height and angle adjustments are convenient, because you do not have to reach around the back of the saw to change settings. The riving knife provides kickback prevention and the UL certification means it meets recognized safety standards.

The fold and roll stand is included and provides a stable platform for cutting. Our team found the stand reasonably easy to deploy and collapse. The 2-year warranty is middle-of-the-pack compared to the Delta’s 5-year and the SKIL’s 3-year coverage.

We need to be direct about the drawbacks. The 3.9-star rating is the lowest on our list, and it reflects real quality control concerns. Multiple users report receiving units with broken plastic components, particularly the rack and pinion gear mount. Blade changes are reportedly difficult due to limited arbor clearance, and the miter gauge has noticeable slop in the slot. Metabo HPT customer service has also received poor marks from several reviewers.

Standout Feature: 35-Inch Rip Capacity

No other portable jobsite saw on our list matches the 35-inch rip capacity to the right. For contractors who work with oversized panels, wide shelving, or custom millwork that requires ripping pieces wider than 32 inches, this is the only option that handles the task in a portable format.

Who Should Buy This Saw

This saw makes sense for contractors whose work specifically demands ripping capacity beyond 32 inches. If you regularly rip extra-wide stock and cannot accomplish the task with a DeWalt DWE7491RS or Bosch GTS15-10, the Metabo HPT’s 35-inch capacity is the solution. Just be prepared to potentially deal with quality control issues and inspect the saw carefully upon delivery.

Contractor’s Buying Guide: How to Choose a Jobsite Table Saw

Choosing the right jobsite table saw comes down to understanding how the specifications translate to real-world cutting performance. Our team put together this buying guide based on years of jobsite experience and the common questions contractors ask when upgrading their equipment.

Rip Capacity: The Number That Matters Most

Rip capacity is the maximum distance between the blade and the fence, and it determines the widest material you can cut in a single pass. For most contractor work, 24 to 25 inches of rip capacity handles 4×8 sheet goods ripped to half-width. If you regularly rip full-width sheets or wide panels, look for 30 inches or more. The Metabo HPT leads at 35 inches, followed by DeWalt DWE7491RS and Delta at 32.5 inches.

For framing and trim work, even 24 inches is usually sufficient. But if you build cabinets, wide shelving, or custom millwork, investing in a saw with 30-plus inches of rip capacity eliminates the need to flip material and make two passes. Our team considers rip capacity the single most important specification to evaluate.

Portability and Weight: Getting It To the Job

Every pound matters when you are loading tools in and out of a truck multiple times per day. The SKIL TS6308-00 at 40 pounds is the easiest to transport by far. The DeWalt DWE7485 at 54 pounds and the SKIL TS6307-00 at 51 pounds are also manageable for one person. At the other end, the DeWalt DWE7491RS at 110 pounds and the Metabo HPT at 96 pounds really need two people or a well-designed rolling stand.

The stand design is just as important as the saw weight. Bosch’s gravity-rise stand and SKILSAW’s 16-inch wheel system are the two best transport solutions we tested. A good stand means you can move a heavier saw by yourself, while a poor stand makes even a light saw frustrating to relocate.

Motor Type: Direct Drive vs Worm Drive

Most jobsite saws use direct drive motors, where the blade mounts directly to the motor arbor. Direct drive is simpler, lighter, and spins faster. The DeWalt DWE7485 leads the direct drive category at 5800 RPM. Worm drive saws like the SKILSAW SPT99-11 use a gear transmission that trades speed for torque. If you cut dense, wet, or treated lumber regularly, the worm drive advantage is real. For finish work and sheet goods, direct drive at higher RPM produces cleaner results.

All saws on our list use 15-amp motors running on standard 120-volt circuits. This means no special electrical requirements and compatibility with standard jobsite generators. Soft start technology, found on the Bosch and Evolution models, reduces the startup current spike and helps prevent nuisance breaker trips.

Fence System Accuracy: The Make-or-Break Feature

Fence accuracy is the number one concern expressed by professional contractors in forum discussions. A fence that drifts mid-cut ruins material and creates safety risks. Every saw on our list uses a rack and pinion fence system, which is the industry standard for jobsite saws. The rack and pinion design uses a toothed gear mechanism to move the fence, keeping it parallel to the blade throughout its range.

Our team found the DeWalt and Bosch fence systems to be the most consistently accurate out of the box. The SKIL fence systems performed well at their price points. The Metabo HPT fence functioned adequately but the plastic gear mount is a potential failure point that several users have reported breaking.

Safety Features: Beyond the Basics

Every saw on our list includes a riving knife or splitter, which prevents the workpiece from pinching the blade and causing kickback. Anti-kickback pawls are included on most models. But the SawStop CTS goes further with its flesh-sensing technology that stops the blade on contact with skin. If safety is your top priority, nothing else compares.

Blade brakes are becoming more common. The Bosch Convenience Brake stops the blade in about 3 seconds. The Evolution includes an electronic blade brake. The DeWalt DWE7485 has a power-loss reset that prevents accidental restarts. These features reduce the window for accidental contact with a spinning blade.

Dust Collection: The Universal Pain Point

Every forum discussion about jobsite table saws includes complaints about dust collection. Most jobsite saws have a 2-1/2-inch dust port that can connect to a shop vacuum. In practice, no jobsite saw captures dust as effectively as a stationary cabinet saw with a full dust enclosure. The SKILSAW and Bosch models received the best marks from our team for dust management.

Pairing your saw with a quality shop vacuum makes a significant difference. Our team recommends checking out the best shop vacuum for woodworking to find a vacuum that keeps your cutting area clean. A cleaner jobsite is safer and produces better results.

Total Cost of Ownership

The purchase price is just the starting point. Factor in the cost of replacement blades, dado sets if needed, a quality stand if not included, and a dust collection solution. The SKIL TS6308-00 requires a separate stand purchase, which adds to the total. The SawStop requires replacement brake cartridges after each activation. Budgeting for blades and accessories alongside the saw itself gives you a more accurate picture of the real investment.

Warranty coverage varies significantly. Delta leads with a 5-year professional warranty. DeWalt offers 3 years on the DWE7491RS. SKIL provides 3 years on the TS6307-00. SKILSAW covers the SPT99-11 for 1 year. Consider the warranty length relative to the price when comparing value across models. If you are also building out the rest of your shop, our guide to cordless power tool combo kits can help you round out your equipment.

FAQs

Final Thoughts on Jobsite Table Saws for Contractors

Our team spent weeks evaluating these 10 models to identify the best jobsite table saws for contractors in 2026. The Bosch GTS15-10 takes our top spot for its unmatched combination of power, mobility, and safety features. The SKIL TS6307-00 delivers the best value, and the SKIL TS6308-00 wins on budget and portability.

Consider your specific workflow when choosing. Framing contractors need torque and depth of cut. Finish carpenters need fence accuracy and clean cuts. Cabinet builders need rip capacity and dado compatibility. And every contractor needs a saw that starts reliably every morning and delivers consistent results all day. Once you have your saw sorted, check out our guide to the best bench top drill press for your shop to complete your cutting station.