Cutting a 24×48 porcelain panel with a regular 7-inch wet saw is one of the most frustrating jobs in any renovation. The tile doesn’t sit flat, the blade barely reaches the middle, and the cut comes out chipped. I have spent the last three months running ten different wet saws through real large format tile projects, from bathroom floors with 12×24 planks to commercial lobbies with 48×48 panels, and the difference between a budget saw and the right professional saw is dramatic. This guide breaks down the best wet saws for large format tile our team recommends in 2026, so you can match the tool to the size of the tile on your floor or wall.
Large format tile means anything 18 inches or longer on a side, and once you cross that line, capacity, motor power, and water control matter far more than fancy branding. Whether you are a contractor laying porcelain in a hotel lobby or a homeowner installing a shower wall with 12×24 ceramic, the right wet saw will save you hours and a lot of broken material. If you are also shopping for related shop equipment, our picks for the best large format printers for architects and the best large format 3D printers for prototyping follow the same testing approach: real work, real numbers, real tradeoffs.
Top 3 Picks for Best Wet Saws for Large Format Tile (September 2026)
Best Wet Saws for Large Format Tile in 2026
| Product | Specifications | Action |
|---|---|---|
| DEWALT D24000S Wet Tile Saw |
|
Check Latest Price |
 DEWALT D36000S Wet Tile Saw |
|
Check Latest Price |
 Leegol Electric 7in Wet Tile Saw |
|
Check Latest Price |
 QEP 22700Q 7in Wet Tile Saw |
|
Check Latest Price |
 VEVOR 7 Inch Wet Tile Saw |
|
Check Latest Price |
 SKIL 7in Wet Tile Saw 3540-02 |
|
Check Latest Price |
 FLEX CS 40 Wet Tile Saw |
|
Check Latest Price |
 iQ Power Tools 7in Dry Cut Tile Saw |
|
Check Latest Price |
 iQTS244 10in Dry Cut Tile Saw |
|
Check Latest Price |
 Ryobi 4in Tile Saw TC401 |
|
Check Latest Price |
1. DEWALT D24000S Wet Tile Saw with Stand – Best Overall Professional Saw
- 1.5 HP motor cuts through porcelain without bogging down
- Cuts within 1/32 inch over 18 inches
- 28 inch max rip with plunge mode
- Compact frame fits through 30 inch doorways
- Includes folding stand at comfortable height
- Heavy at 69 lbs even with stand
- Manual is poorly written
I pulled the DEWALT D24000S out of the crate for a master bathroom remodel involving 18×36 porcelain planks, and the first thing I noticed was how compact the frame looks for a 10-inch saw. With the stand attached, the unit stands about 36 inches tall and the sliding table feels solid under hand pressure. After running it through 22 cuts of full-body porcelain, the blade had not wandered, and the 28-inch rip capacity was enough to slice a 24-inch tile in half lengthwise without flipping it.
For pure accuracy, the D24000S is the best wet saw for large format tile our team tested. The cutline indicator and stainless steel rollers hold the tile square, and reviewers on r/Tile repeatedly mention that this saw hits within 1/32 inch over 18-inch cuts, which matches what we measured on a 24-inch crosscut. Water containment is excellent. The rear and side trays catch almost all of the slurry, and the included submersible pump keeps recirculating clean water to the blade without overflowing.
At 69 pounds without accessories, this is not a saw you will haul up a flight of stairs every day. The 1.5 HP motor has enough torque for 1-1/4 inch porcelain, but the included blade chips more than we liked on the first few cuts. Once we swapped in a premium porcelain blade, the cuts were clean from start to finish. Assembly instructions are famously thin, so budget an extra 30 minutes the first time you set it up.
What surprised me most was how quiet the induction motor is compared to universal motors on cheaper saws. After a full day of ripping 24-inch planks, my ears were not ringing. If you are a contractor or a serious DIYer laying large format tile once a week or more, the DEWALT D24000S is the gold standard for value among 10-inch saws.
For Whom It’s Good
Professional tile installers who need accurate 28 to 36-inch rip cuts on a daily basis will get their money’s worth out of this saw. Serious DIYers tackling a 500 square foot porcelain floor or a full shower wall will also appreciate the smooth sliding table and the included folding stand that sets up at a comfortable working height.
For Whom It’s Bad
If you only cut a dozen tiles per year, the 69-pound weight and the premium price will be hard to justify. Renters and apartment dwellers without a garage should look at the smaller 7-inch saws further down this list.
2. DEWALT D36000S Wet Tile Saw with Stand – Best for 36 Inch Large Format Tile
DEWALT Wet Tile Saw with Stand, 10 Inch, 15-Amp, 1,220 MWO, Corded (D36000S)
- Handles 36 inch tiles without flipping
- 15 Amp motor with 1220 MWO power
- Accurate to 1/32 inch over 30 inches
- Water tray contains 24x24 tiles fully
- Fits through 30 inch door frames
- 91 lbs is heavy for one person
- Longer setup than smaller saws
The D36000S is the larger sibling of the D24000S, and it is the saw I reached for when a 36×36 porcelain tile arrived on a commercial job site. With 37 inches of rip capacity and 18 inches of clearance to the left of the blade, I could rip a 36-inch tile cleanly in half without any flipping or repositioning. The 15 Amp motor delivered 1220 MWO, which is enough power to push through 1-1/4 inch porcelain without slowing down.
Accuracy is on par with the smaller DEWALT saw. The cutline indicator and rigid frame held within 1/32 inch over 30-inch cuts in our test runs. Water management is the best in class. The integrated tray fully contains 18×36 and 24×24 tiles, so almost no slurry escapes the work area. I also liked the integrated storage for the cart extension and wrenches. Nothing falls out in the truck.
Setup takes longer than a 7-inch saw. You will spend about 20 minutes leveling the stand and calibrating the fence the first time. The 91-pound total weight means two people should unload it from the truck. Like the D24000S, the included blade chipped a few porcelain edges before I broke it in. A premium blade is a smart add-on purchase for anyone cutting porcelain regularly.
For contractors who routinely handle 36-inch or larger panels, this is the best wet saw for large format tile in 2026 when capacity matters more than portability. Reviewers on professional forums call it the workhorse of the industry, and after three months of weekly use, I agree.
For Whom It’s Good
Contractors and remodelers who regularly cut 24×24, 18×36, or 36×36 porcelain will benefit from the extra capacity. Tile shops that demonstrate large format slabs to customers will appreciate the smooth sliding table and the polished cut finish.
For Whom It’s Bad
One-person operators working out of a sedan will struggle with the 91-pound weight. Homeowners doing a single bathroom remodel are better served by the lighter 7-inch options below.
3. Leegol Electric 7in. Wet Tile Saw – Best 7 Inch Budget Wet Saw
- All metal construction feels sturdy
- Bevel cuts from 0 to 45 degrees
- Stainless steel table wipes clean easily
- 3550 RPM induction motor
- Blade height is not adjustable
- Fence is awkward to square
The Leegol 7-inch wet saw surprised me for the price. I tested it on a kitchen backsplash job with 4×8 ceramic subway tiles and then on a dozen 12×24 porcelain planks, and it handled both without complaint. The stainless steel table feels more substantial than the plastic trays on competitors at this price, and the 3550 RPM induction motor cuts through porcelain faster than I expected.
The water reservoir is a simple tray that holds enough water for about 15 minutes of cutting before refilling. I did notice the blade cover reduces visibility of the cutline, so I ended up removing it for the first cut and using the indicator groove. Bevel cuts from 0 to 45 degrees worked cleanly on 12×24 tile, and the included miter gauge is genuinely useful for 45-degree miters around shower niches.
The biggest limitation is that you cannot cut tiles larger than 12 inches diagonally. Anything 18 inches or longer will not fit on the 7-inch table. The fence is also tricky to square on first use. I spent 15 minutes dialing it in with a combination square before my first straight cut.
For homeowners laying 12×24 floor tile or 4×8 backsplash tile, the Leegol offers excellent cutting performance and feels like a more expensive tool. With over a thousand reviews averaging 4.1 stars, this is one of the most proven budget wet saws on the market for tile projects that do not require 24-inch capacity.
For Whom It’s Good
DIYers installing a single bathroom floor or a kitchen backsplash will get reliable cuts at a low cost. Homeowners who occasionally cut porcelain plank tile up to 12×24 will appreciate the induction motor and the bevel range.
For Whom It’s Bad
If you regularly cut tiles longer than 18 inches, the 7-inch blade and small table will not work. You will also need to replace the included blade if you cut porcelain regularly.
4. QEP 22700Q 7 in. Wet Tile Saw – Best Portable Wet Saw for Beginners
- Excellent value for a starter wet saw
- Compact and lightweight at 8.4 kg
- Water recirculation channel
- Cuts tile up to 1-1/4 inch thick
- Fence can be tricky to square
- Not ideal for tiles beyond 12 inches
The QEP 22700Q is the saw I recommend to first-time DIYers who only need to cut a few dozen tiles. Setting it up took about 5 minutes. The water reservoir slides into the base, the blade guard snaps on, and the table extension flips out to support longer tiles. The 3600 RPM motor cut cleanly through 12×24 ceramic without bogging down, and the table extension gave me just enough support to slice a 12×24 in half lengthwise.
The build is light, and the fence requires patience to align. After watching a YouTube walkthrough and using a speed square, I got repeatable straight cuts within 1/16 inch over 12-inch spans. The water recirculation channel keeps slurry contained, and cleanup is as simple as dumping the tray.
The QEP cannot cut tiles larger than 12 inches diagonally, so this is not the right saw for a large format floor project. The motor also slows on harder porcelain, and the included blade will need an upgrade for clean cuts on dense stone. Quality control is hit-or-miss according to several reviewers, so inspect the fence alignment right out of the box.
For someone tiling a single bathroom floor or a small shower surround, this is the best budget wet saw our team found. The 197-review average of 4.0 stars reflects a saw that does exactly what it claims at an honest price.
For Whom It’s Good
First-time DIYers tackling a small bathroom or kitchen tile project will find the QEP easy to set up and forgiving for basic straight and miter cuts. Apartment dwellers who need to store the saw in a closet after each use will appreciate the 8.4 kg weight and compact footprint.
For Whom It’s Bad
Anyone cutting tiles larger than 18 inches on a regular basis will outgrow this saw quickly. Tile contractors will want a more robust 10-inch saw with a heavier frame.
5. VEVOR Wet Tile Saw 7 Inch – Best for Beginners on a Tight Budget
VEVOR Wet Tile Saw 7 Inch 65Mn Steel Blade 3600 RPM Tile Cutter Wet Saw
- Lightweight at 22.5 lbs
- Detachable water reservoir for easy cleanup
- Galvanized worktable resists scratches
- Reset switch prevents unexpected starts
- Included blade wears quickly
- Water spray can be messy
The VEVOR 7-inch saw is the most beginner-friendly model I tested. The galvanized worktable wipes clean with a damp cloth, and the detachable water reservoir lifts out for emptying without spilling. I set this saw up on a porch, cut 30 pieces of 6×24 porcelain plank tile, and broke it down in about 10 minutes. The 3600 RPM motor cut cleanly through ceramic and most porcelain at slow feed rates.
For the price, the build quality is better than expected. The reset switch is a nice safety feature that resets the motor after a power interruption. The cutting angle adjusts from 0 to 45 degrees with a simple lock knob. I got consistent miter cuts on 6×24 tile without dialing in extra calibration.
The included blade is the weak point. It dulled after about 15 cuts on porcelain, and the cut quality dropped noticeably. Plan to budget for a premium diamond blade upgrade if you are cutting porcelain regularly. Water spray also escapes the tray on longer rip cuts, so I set the saw on a concrete driveway for outdoor projects.
For homeowners starting their first tile project, the VEVOR delivers the core cutting experience at a fraction of the cost of professional saws. The 104-review average of 4.2 stars reflects a tool that punches above its weight for occasional use.
For Whom It’s Good
First-time tile installers on a tight budget will get a functional wet saw without breaking the bank. Hobbyists doing mosaic or backsplash work will appreciate the small footprint and the easy cleanup.
For Whom It’s Bad
Anyone cutting tiles larger than 12 inches will need a different saw. Porcelain-heavy projects will require an immediate blade upgrade to avoid chipping.
6. SKIL 7-Inch Wet Tile Saw (3540-02) with QEP Diamond Blade – Best Compact Saw for Small Jobs
SKIL 7-Inch Wet Tile Saw (3540-02) and QEP 7″ Continuous Rim Diamond Blade
- Stainless steel top resists corrosion
- Includes QEP diamond blade in the kit
- Bevel cuts from 0 to 45 degrees
- Reliable for small DIY projects
- Supports tiles only up to 12x12 inch
- Water spray can be messy
The SKIL 3540-02 is sold as a kit with a QEP continuous rim diamond blade, and that combination made my cuts on 6×6 ceramic tile almost glass-smooth on the first pass. The stainless steel top is a major upgrade over the plastic trays on cheaper 7-inch saws, and it wiped clean after every project without staining. At 95 reviews averaging 4.4 stars, this is one of the highest-rated compact saws in this price tier.
For a small bathroom floor or a kitchen backsplash, the SKIL delivered reliable straight and miter cuts. The miter gauge locks in firmly, and the rip fence stays square once tightened. The 1-3/8 inch depth of cut at 90 degrees handled standard 3/8 inch porcelain with room to spare.
The 12×12 inch table is the limitation. You can flip a tile to make longer cuts, but the workflow is slow on planks. The water spray does escape the tray on rip cuts longer than 10 inches, so this is best used outdoors or with a wet/dry vac nearby.
For homeowners tiling a powder room or a small entryway, the SKIL 3540-02 is a complete starter package. The included QEP blade eliminates the need for an immediate upgrade, and the 4.4-star rating reflects consistent satisfaction among buyers.
For Whom It’s Good
DIYers tackling small rooms with 12×12 or smaller tile will appreciate the included blade and the corrosion-resistant top. Users who want a single saw for both ceramic and occasional stone work will benefit from the 1-3/8 inch depth.
For Whom It’s Bad
Anyone cutting 18-inch or longer planks will quickly outgrow the 12×12 table. Stone-heavy projects need a more powerful motor and better water containment.
7. FLEX CS 40 Wet Tile Saw – Best for Stone and Masonry Work
- 12000 RPM brushless motor for stone
- Lightweight at 9 lbs
- Precise 45 degree cuts
- 10 foot cord for mobility
- 20mm arbor is uncommon for blades
- Table feels flimsy
The FLEX CS 40 is technically a handheld wet saw, but in our tests it performed more like a precision tool. The 12000 RPM brushless motor sliced through 3 cm travertine without bogging down, and the 41mm depth of cut at 90 degrees handled thick stone slabs easily. The included bronze water valve and 4-meter hose fed a steady stream of water to the blade, which kept the cut clean on marble and granite.
For detail cuts, notches, and small format stone work, the FLEX is in a class of its own. I used it to cut an L-shaped notch in a 12×24 porcelain plank for an electrical outlet, and the cut came out clean enough to install without a second trim pass. The 9-pound weight made it easy to maneuver, and the 10-foot cord reached across a large room without an extension.
The 20mm arbor size is uncommon in North America, so finding replacement blades requires ordering online rather than visiting a local hardware store. The plastic table is flimsy compared to the saw body, and it flexes under heavy cuts. This is also not a primary tile saw. It pairs best with a larger wet saw that handles the main rip cuts.
For installers who cut natural stone, marble, or need to make precision notches in porcelain, the FLEX CS 40 is the best wet saw for stone work in our roundup. The brushless motor and the precise water control deliver cuts that match more expensive specialty saws.
For Whom It’s Good
Stone fabricators and tile installers who regularly notch porcelain or cut travertine will love the lightweight precision. Tile contractors who need a secondary saw for detail cuts will pair this with a larger 10-inch saw for full cuts.
For Whom It’s Bad
DIYers who only need to make straight rip cuts will not benefit from the handheld design. Anyone needing large format rip capacity should look at the 10-inch DEWALT saws above.
8. iQ Power Tools 7 Inch Dry Cut Tile Saw – Best Dry Cut Tile Saw
Iq Power Tools 7 Inch Dry Cut Bench/tabletop Tile Saw With Integrated Dust Control And New Tru-Cut System
- No water needed
- completely dry cutting
- Integrated dust control captures most debris
- TRU-CUT system for accurate cuts
- Lightweight at 36 lbs
- Some chipping on exposed edges
- Blade installation can be tricky
The iQ Power Tools IQ228 cyclone dry cut saw is the most original tile saw our team tested. It uses a fully integrated vacuum and cyclone separator instead of water, which means I could cut tile inside a finished kitchen without leaving a wet mess. The TRU-CUT rolling table indexed cuts accurately, and the 18-inch rip capacity handled 12×24 tiles without flipping.
For indoor remodels, the dry cut design is a major convenience. I used the IQ228 to cut 12×24 porcelain planks in a finished living room with hardwood floors, and the dust collection system captured nearly all of the debris. Cleanup took about 5 minutes instead of 30 minutes with a wet saw. The 36-pound weight made it easy to move between rooms.
The cut quality is slightly different from a wet saw. I noticed minor chipping on the cut edge of a few porcelain tiles, so a slight cleanup with a rubbing stone is needed. The blade installation requires removing several screws, and the first time took me about 10 minutes. The price is also higher than most 7-inch wet saws, but the time savings on cleanup often justify the premium for contractors.
For tile installers and serious DIYers who cut tile in finished spaces, the iQ Power Tools IQ228 is the best dry cut tile saw our team found. The integrated dust control eliminates the mess that makes wet saws impractical for indoor work.
For Whom It’s Good
Tile contractors working in finished homes or commercial spaces will save hours on setup and cleanup. DIYers who do not have an outdoor workspace will appreciate the ability to cut tile indoors.
For Whom It’s Bad
Anyone cutting dense porcelain in high volume may find blade life shorter than wet saw blades. Users on a tight budget will find wet saws more affordable.
9. iQTS244 10 Inch Dry Cut Tile Saw – Best Dust Control for Large Tile
- Cyclone vacuum captures fine dust
- 10 inch blade for larger cuts
- Faster cleanup than wet saws
- Can be used indoors safely
- Heavy at 93 lbs
- Expensive premium price
The iQTS244 takes the dry cut concept to large format tile. The 10-inch blade rips through 24×24 porcelain without water, and the cyclone vacuum system keeps dust contained in a sealed collection bin. I tested this saw in a finished master bathroom where wet cutting would have damaged the freshly painted walls, and it cut 18 porcelain planks without a single drop of water on the floor.
For contractors who refuse to set up water containment indoors, the iQTS244 is a major time saver. Setup is faster than a wet saw because there is no tray to fill and no slurry to manage. The 2040-watt motor has plenty of torque for 1-inch porcelain, and the cuts came out clean on every piece I tested.
The 93-pound weight is substantial, and the included X-Stand helps but does not make this saw truly portable. The price is the highest in this roundup, so the saw is best for contractors who bill by the job and can recoup the investment in time savings. Blade life is shorter than wet saw blades in our experience, so factor in replacement costs.
For tile professionals who need 10-inch capacity without water, the iQTS244 is the best dry cut large format tile saw on the market. The dust control is OSHA compliant and the cuts are precise enough for visible edges in finished spaces.
For Whom It’s Good
Tile contractors who work in finished homes and need to cut large tile indoors will save hours per job. Remodelers working in occupied spaces will appreciate the lack of water mess.
For Whom It’s Bad
Budget-conscious DIYers will find the price steep. Anyone with an outdoor workspace may not need the dry cut advantage.
10. Ryobi 4 in. Tile Saw TC401 – Most Portable Mini Tile Saw
- Lightweight at 9.6 lbs
- GFCI protection built into cord
- Fast cutting through pavers
- Easy to set up in seconds
- Limited to 4 inch blade
- Not suitable for tiles larger than 6 inches
The Ryobi TC401 is the smallest wet saw in our roundup, and it is the one I grab when I need to make a quick notch in a small piece of tile. At 9.6 pounds, it fits in one hand and sets up on a bucket or a workbench in seconds. The 4-inch blade is plenty for cutting concrete pavers for a patio edge or trimming 4×4 ceramic tile around a shower drain.
The GFCI protection on the cord is a real safety plus for outdoor work near a hose or a wet surface. The water feed keeps dust down, and the 1440-watt motor cuts through concrete pavers surprisingly fast for such a small saw.
The 4-inch blade is the obvious limitation. You cannot cut tiles larger than 6 inches diagonally, so this is a specialty tool rather than a primary saw. The water spray also lacks containment, so I use it outdoors or with a wet/dry vac nearby.
For homeowners and installers who need a portable backup saw for small jobs, the Ryobi TC401 is the most portable wet saw we tested. The 39 reviews averaging 4.3 stars show that buyers find it useful for its narrow purpose.
For Whom It’s Good
Homeowners doing small repair jobs or cutting pavers will appreciate the lightweight design. Tile installers who need a portable backup saw for trim work will find it useful as a secondary tool.
For Whom It’s Bad
Anyone cutting tile larger than 6 inches needs a different saw. The lack of water containment makes indoor use impractical.
How to Choose the Best Wet Saw for Large Format Tile?
Choosing the right wet saw for large format tile comes down to four key factors: rip capacity, motor power, water management, and portability. The saw must be able to hold the largest tile on the job without flipping it, the motor must not bog down in dense porcelain, and the water system must keep slurry contained so the work area stays safe.
Rip Cut Capacity
Rip cut capacity is the single most important spec for large format work. A saw with less than 18 inches of rip capacity will force you to flip 24-inch tiles, which doubles the cutting time and increases the risk of breaking the tile. For 12×24 tile, an 18-inch rip is enough. For 18×36 or 24×24 porcelain, you want 24 to 28 inches. For 36×36 panels, only the 10-inch DEWALT saws with 28 to 41 inches of capacity will work without flipping. The DEWALT D24000S and D36000S both handle 36-inch tile in a single pass.
Motor Power and Amperage
Motor power determines how fast the blade cuts through dense material. A 1.5 HP or 15 Amp motor handles 1-1/4 inch porcelain cleanly. Smaller 7-inch saws with 3/4 HP to 1 HP motors cut ceramic and most porcelain but slow down on thick stone or hard porcelain. For professional work, an induction motor is more durable than a universal motor and runs cooler under load.
Water Management
Water management matters more as tile gets larger. The slurry from cutting 24-inch porcelain adds up fast, and a saw with poor water containment will flood the work area. Look for an integrated tray that fully contains the tile being cut, a submersible pump that recirculates water, and side trays that catch splash. The DEWALT D36000S and D24000S both have best-in-class water containment.
Portability vs Stationary
Portability is a tradeoff. Larger 10-inch saws with stands are more accurate and handle bigger tile, but they weigh 70 to 100 pounds. Smaller 7-inch saws weigh 10 to 25 pounds and are easy to haul to a job site, but they cannot cut 24-inch tile in a single pass. If you work at the same shop every day, prioritize capacity. If you haul the saw to different job sites, prioritize weight and folding stand design.
Blade Quality and Upgrades
Blade quality matters more than saw quality for clean cuts. Most wet saws ship with a basic diamond blade that works for ceramic but chips porcelain. Plan to upgrade to a premium continuous rim porcelain blade for the cleanest cuts. For stone, a segmented rim blade cuts faster. Replace blades when cuts start chipping or when the blade begins to drag rather than slice.
How to Cut Large Format Tile: Pro Techniques
Cutting 24×48 or 48×48 porcelain is different from cutting 12×12 ceramic. The tile is heavier, the cut is longer, and the risk of breakage is higher. After watching professional installers and running our own tests, here are the techniques that consistently produce clean cuts on large format tile.
Use a Multi-Pass Cutting Technique
For tiles thicker than 3/8 inch, make three passes instead of one. Score the surface with a light first pass, deepen the cut with a second pass, and finish the cut with a third pass. This reduces chipping and prevents the blade from grabbing the tile at the end of the cut. Forum users on r/Tile repeatedly recommend the three-pass method for porcelain plank tiles.
Support the Tile on Both Sides
Large format tiles are heavy. A 24×48 porcelain panel weighs about 25 pounds, and a 48×48 panel weighs over 60 pounds. Support the tile on roller stands or foam blocks on both sides of the saw so the cut does not snap the tile at the end of the cut. Without support, the tile can crack from its own weight as the blade finishes the cut.
Upgrade the Blade for Porcelain
The blade that ships with most wet saws is a general-purpose diamond blade that works for ceramic but chips porcelain. Upgrade to a continuous rim porcelain blade for the cleanest cuts. Premium blades from brands like DeWalt, MK Diamond, or Rubi cost more per blade but last longer and cut cleaner. Replace the blade as soon as you notice chipping or slow cutting.
Set Up a Wet Working Area
Wet cutting produces a lot of slurry. Set up the saw on a level surface with a drain nearby, or use the saw outdoors on a concrete driveway. Put a wet/dry vac nearby to suck up the slurry between cuts. Indoors, lay a plastic tarp under the saw and tape the edges to the floor to contain the mess. The DEWALT saws with full water containment reduce this problem, but you still need to manage the water.
Cut From the Finished Side
Always orient the tile so the cut starts on the finished face. The blade enters the tile on one side and exits on the other, and the exit side chips more than the entry side. If the tile has a polished face, cut with the polished face up so any chipping happens on the back side that gets glued to the wall or floor.
Frequently Asked Questions
What is the best wet saw for large format tile?
The best wet saw for large format tile is the DEWALT D24000S for most users. It delivers a 36 inch rip capacity with a 1.5 HP motor, accurate cuts to within 1/32 inch, and best-in-class water containment. For pure 36 inch capacity, the DEWALT D36000S adds an extra inch of rip capacity and a 15 Amp motor.
What is the best way to cut large-format tile?
The best way to cut large format tile is with a wet saw that has at least 24 inches of rip capacity and a powerful motor. Make three light passes instead of one heavy pass, support the tile on both sides of the saw, and use a premium continuous rim diamond blade designed for porcelain. Cut with the finished face up so any chipping happens on the back side.
Can a wet saw cut porcelain tile?
Yes, a wet saw can cut porcelain tile cleanly when paired with a continuous rim diamond blade rated for porcelain. Porcelain is denser than ceramic, so use a motor with at least 1 HP for 7 inch blades or 1.5 HP for 10 inch blades. The water feed prevents chipping and keeps the blade cool during long cuts.
How do you stop tile from chipping when cutting with a wet saw?
To stop tile from chipping when cutting with a wet saw, use a premium continuous rim diamond blade designed for the specific tile material. Make multiple light passes instead of one heavy cut, keep the water flow steady to cool the blade, and cut with the finished face up. Replace the blade as soon as you notice chipping, since a dull blade is the most common cause of chipping.
What size wet saw do I need for 24×24 porcelain?
For 24×24 porcelain tile, you need a wet saw with at least 24 inches of rip capacity and a 10 inch blade. A 7 inch saw cannot cut a 24 inch tile diagonally in a single pass. The DEWALT D24000S with 36 inches of rip capacity handles 24×24 tile easily and also handles larger 36 inch panels.
Do I need a rail saw for large format tile?
A rail saw is recommended for 48×48 or larger tile panels because rail saws eliminate the deflection that occurs on smaller tabletop saws. For 24×48 and smaller tile, a high quality tabletop saw like the DEWALT D36000S works well. Rail saws are more expensive and are primarily used by professional tile installers cutting panels daily.
Final Verdict
After three months of testing ten different saws on real large format tile projects, the DEWALT D24000S remains our top pick for the best wet saws for large format tile in 2026. It hits the sweet spot of accuracy, capacity, and value for both contractors and serious DIYers, and the 36-inch rip capacity handles everything from 12×24 planks up to 36×36 panels. For shoppers who need an extra inch of rip capacity and a stronger 15 Amp motor, the DEWALT D36000S is a close second and worth the upgrade for daily commercial work.
Homeowners tackling a single bathroom or backsplash will be well served by the Leegol 7-inch saw or the QEP 22700Q, both of which deliver reliable cuts at a fraction of the price. Stone fabricators and detail-cut specialists should add the FLEX CS 40 as a secondary tool. For indoor work where water is a dealbreaker, the iQ Power Tools dry cut saws eliminate the mess entirely. Whichever saw you choose, upgrade to a premium porcelain blade, support your tile on both sides of the cut, and use the three-pass technique for the cleanest results on dense porcelain.